Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cleaning & Sweep Across Woodlawn
A chimney cleaning and sweep in Woodlawn typically runs between $189 and $329 for a standard open-fireplace flue, and most jobs are completed in under two hours. If your home sits west of Security Boulevard in one of the 1950s-to-1970s Cape Cods, ranchers, or split-levels that define this zip code, that sweep should include a camera inspection, not just a brush run. Call (443) 363-5262 for a written price before anyone steps foot in your house.
We know Woodlawn’s chimneys because we work on them constantly. The housing stock here is specific: full-brick and block exteriors, clay tile liners now 60 to 70 years old, and a lot of oil-to-gas conversions that left flues sized for the wrong appliance. That local pattern drives the work we do, and it’s why our Chimney Cleaning & Sweep crews carry cameras on every single job. No flashlight guesswork. No “trust me” pricing. We show you what’s inside your flue before we recommend anything.
Why Level Two Chimney Ellicott City Is Woodlawn’s Preferred Chimney Cleaning & Sweep Company
Level Two Chimney Co. has inspected and cleaned more than 38,000 chimneys since 2009, and every one of those jobs started with a written price, a written scope, and a written warranty before the work began. That’s Clause 1 of the Haven Standard, the inspection and documentation protocol we built the company around. In Woodlawn, where older masonry chimneys hide expensive problems behind clean-looking brick, that documentation matters more than anywhere else.
Our technicians are background-checked and uniformed, with their license number displayed on every page and a named tech assigned to your appointment. You get a text when they’re on the way. You get a call answered by a live person, 24 hours a day, 7 days a week, not a voicemail tree. And when the job is done, you walk away with a documented photo record: flue conditions, creosote readings, before-and-after shots from the camera. Clause 4 of the Haven Standard has required that archive on every visit since 2009, years before insurers or regulators started asking for it.
Corrine Halstead, who leads our team, built this operation around a simple idea: a sweep is only worth what the homeowner can see and verify. That’s why Woodlawn customers get the camera footage on a tablet, not a summary in an email. If you’re researching before you call, you’re exactly the kind of homeowner we built this for.
Our Chimney Cleaning & Sweep Services in Woodlawn

Level 1 Inspection
A Level 1 inspection in Woodlawn covers the accessible portions of the chimney: the flue interior, the damper, the smoke chamber, and the exterior brick or block you can see from the ground. It’s the right call for homes with a chimney that’s been serviced regularly and hasn’t changed appliances. In Woodlawn’s older housing stock, we rarely stop at Level 1 if the flue has never been camera-scanned, because the clay tile liners in these 60-year-old chimneys hide damage a visual check can’t catch.

Level 2 Inspection
A Level 2 inspection is what we recommend for most Woodlawn homes, especially off Windsor Mill Road, Featherbed Lane, and the residential blocks around Dogwood Road. It adds a camera scan of the entire flue interior, a check of the attic and crawlspace-accessible portions, and a close look at the flue sizing relative to your heating appliance. This is the inspection that catches oversized flues on oil-to-gas conversions, spalling clay tiles, and condensation-driven creosote glaze before they become a carbon monoxide problem. In Woodlawn, a Level 2 inspection runs $149 to $249 when booked with a cleaning.

Creosote Removal
Creosote in Woodlawn chimneys falls into a few classes. First-degree is a light, flaky soot that brushes off easily. Second-degree is a harder, granular deposit. Third-degree is the shiny, tar-like glaze we find frequently in gas-converted chimneys in this area, because cooler gas exhaust condenses inside oversized flues and bakes creosote into a tarry layer that a standard brush will not remove. We use mechanical removal methods and rotary tools for third-degree creosote, then document the result with a photo record showing first-degree creosote at zero.

Soot Removal
Woodlawn homeowners who burn wood regularly on winter nights off Security Boulevard often see soot accumulation in the firebox, damper, and smoke chamber. Soot itself isn’t the fire risk that creosote is, but it restricts draft and signals incomplete combustion. We clean the full pathway from firebox to flue cap, remove the soot, and check the damper and smoke chamber for cracks or obstruction. In homes built between 1950 and 1975, the smoke chambers often have corbeled brick that was never parged, and we’ll flag that when we see it.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Woodlawn
When a Woodlawn chimney needs a liner, cap, or crown repair, we install materials from DuraFlex, Olympia Chimney, and Copperfield. These are the brands we trust because they hold up to Baltimore’s freeze-thaw cycles and the condensation issues common in gas-converted flues. We keep common parts and liner sizes warehoused for fast turnaround on Woodlawn jobs, which means we’re not waiting on a distributor when we find a failed liner on a 1964 rancher off Featherbed Lane. You get the part and the price in writing, same visit.
Common Chimney Cleaning & Sweep Problems We See in Woodlawn Homes

- Oversized flues on oil-to-gas conversions. Woodlawn’s mid-century homes were built with chimneys sized for oil-fired boilers producing high-temperature exhaust. When owners switched to gas, the flue stayed too large for the cooler, moisture-heavy gas exhaust, and that mismatch drives condensation and accelerated creosote buildup.
- Spalling and cracked clay tile liners. Baltimore’s freeze-thaw pattern, repeated cycles above and below freezing rather than sustained cold, forces water into minor cracks and fractures clay tile sections season after season. We routinely find new damage on Woodlawn chimneys that were serviced just a year earlier.
- Third-degree creosote glaze from condensation. The tar-like, shiny creosote we see in gas-converted Woodlawn chimneys won’t come out with a standard wire brush. It requires mechanical removal, and if it’s left in place, it keeps restricting draft and trapping moisture even after a “sweep” was supposedly done.
- Failing crowns and mortar joint deterioration. Full-brick and block chimneys built in the 1950s through 1970s are now well past their typical 50-year service threshold. Crowns crack, mortar erodes, and water gets in, accelerating every other problem. We inspect the crown and joints on every visit, not just the flue interior.
Pricing for Chimney Cleaning & Sweep in Woodlawn, MD
A standard chimney cleaning and sweep in Woodlawn runs $189 to $329 for a single open-fireplace flue. A Level 2 camera inspection booked with a cleaning adds $149 to $249. Creosote removal for third-degree glaze, which we see frequently in gas-converted chimneys in this area, runs $349 to $649 depending on flue length and severity. If the camera reveals a liner that needs replacement, we’ll show you the footage on a tablet and put the price in writing before any work begins. We offer a free second opinion on any competitor’s written estimate, because we’d rather earn the job with evidence than win it with a sales pitch. Call (443) 363-5262 for a written estimate. No surprises, no numbers that change after the tech arrives.
We Also Serve Cities Near Woodlawn

Beyond our Chimney Cleaning & Sweep in Woodlawn coverage, our crews serve Ellicott City, Catonsville, Columbia, and Milford Mill. Scheduling for all these areas is coordinated from our Baltimore office, with local crews dispatched to Woodlawn daily. If you’re in a neighboring zip code, call (443) 363-5262 and we’ll let you know the next available slot.
Serving Woodlawn, MD - Our Local Coverage Area
We’re based in the Woodlawn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Woodlawn

Because the original clay tile liners in Woodlawn’s 1950s-to-1970s homes are now 60 to 70 years old, and Baltimore’s freeze-thaw cycles have spent decades forcing water into hairline cracks and expanding them into structural failures. Newer Catonsville construction often uses stainless steel or newer clay liners that haven’t hit that age threshold. The failure rate in Woodlawn isn’t about homeowner neglect; it’s material fatigue. Call (443) 363-5262 for a camera inspection that shows you exactly what condition your liner is in.
Your flue is oversized for the gas appliance now venting into it. Gas exhaust is cooler and moisture-heavy compared to oil exhaust, and when it hits an oversized clay tile flue, it condenses and bakes creosote into a hard, tar-like glaze. This is the defining service call in Woodlawn’s older blocks west of Security Boulevard, and it’s why a brush-only sweep won’t fix it. We size the liner to the appliance and remove the glaze mechanically, then show you the before-and-after. Call (443) 363-5262 for a written quote.
Yes, because the issues in Woodlawn chimneys are not always caused by how often you burn. A 60-year-old clay tile liner can be cracking and spalling from freeze-thaw damage even if you never light a fire. If the chimney also vents a gas appliance, condensation is building creosote regardless of fireplace use. We recommend an annual sweep and a Level 2 camera inspection every few years for older Woodlawn homes. Estimates are free, and the price is always in writing before work starts.
A Level 2 inspection includes a camera scan of the entire flue interior, a check of accessible attic and crawlspace portions, and an assessment of flue sizing relative to your heating appliance, while a basic sweep just removes surface deposits. For Woodlawn’s older homes, that camera scan is the only way to see spalling clay tiles, hidden mortar joint failures, and the oversized flue conditions common on oil-to-gas conversions. Those problems won’t show up in a brush run. We include the photo record on every Level 2, and you’ll see the footage yourself. Call (443) 363-5262 to book.
No. That shiny, tar-like substance is third-degree creosote glaze, and a standard wire brush will glide right over it. In Woodlawn, we see this frequently in gas-converted chimneys where condensation has baked creosote into a tarry layer. It requires mechanical removal with rotary tools, and it’s a job you want done properly, because third-degree creosote is a fire hazard and a draft restriction. We remove it, document the result, and show you the photo proof. Call (443) 363-5262 for a written price.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Woodlawn and surrounding Baltimore County communities.





Before
After
Before
After